UNIDENTIFIED

IDE/FDC MULTI I-O

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

                     Function                             Location

  25 pin parallel port-external                              CN1

  10 pin serial port 1-internal                              CN2

  10 pin serial port 2-internal                              CN3

  40 pin IDE(AT) interface connector                         CN4

  34 pin data cable connector-floppy drive                   CN5
  interface

  2 pin connector-drive active LED                           LED

                        USER CONFIGURABLE SETTINGS

                Purpose                      Jumper           Setting

  »   Floppy drive interface enabled           JP1           pins 1 & 2
                                                              closed

      Floppy drive interface disabled          JP1           pins 2 & 3
                                                              closed

  »   Parallel port address LPT2               JP2           pins 1 & 2
      select                                                  closed

      Parallel port address LPT3               JP2           pins 2 & 3
      select                                                  closed

  »   Serial port 1 address select             JP3           pins 1 & 2
      3F8h                                                    closed

      Serial port 1 address select             JP3           pins 2 & 3
      3E8h                                                    closed

  »   Serial port 2 address select             JP4           pins 1 & 2
      2F8h                                                    closed

      Serial port 2 address select             JP4           pins 2 & 3
      2E8h                                                    closed

  »   Hard Drive interface enabled             JP5           pins 1 & 2
                                                              closed

      Hard Drive interface disabled            JP5           pins 2 & 3
                                                              closed

  »   Factory configured-do not alter          JP6           pins 1 & 2
                                                              closed